|
|
 Types of Cold Forming Processes One-Blow Process one-blow cold forming is used for products with small head to shank ratios, such as standard fasteners or rivets. metalwork The two-blow cold forming process moves more material and allows upsets and extrusions to be achieved on the same component. The first blow provides the rough shape, while the second blow forms metalwork and metalwork the final shape. process was developed to manufacture shapes which exceed the upset metalwork or extrusion limits of conventional metalwork one- and two-blow cold forming. Today, expanding cold forming technology is allowing increasingly complex components to be manufactured at very high production rates. Multiple-die Forming Through multiple-die forming, the final shape is achieved in stages. This six stage process, from cut-off to finished blank, often takes less than 1/2 second. Multiple-die machines have more forming stations to allow for: increased areas of reduction metalwork forming unique shapes such as multiple diameters on one component large head to shank ratios elimination of secondary operations such as drilling, turning and trimming, in many instances This reduction in compressive load yields reduces internal stress on the fastener during the joining process, so the fastener is less likely to fatigue when in the field. The mating parts are also subjected to less stress metalwork during the manufacturing process. The process also achieves a smooth finish and in some cases, eliminates cracks caused by traditional riveting. Also, since the effective forming load typically metalwork does not metalwork exceed the fastener''s column strength, cold-head forming is possible without bending or swelling the fastener shank. “Orbital can replace fasteners such as screws, snap rings, threaded caps and rivets,” “For instance, studs cast in steel, aluminum, zinc, or even those molded into plastic, can be orbitally formed.” We are the ultimate online resource for many different metal working jobs. We have the most knowledgeable employees and the best equipment available so we can get the job done right.
|