|
We are the ultimate online resource for many different metal working jobs. We have the most knowledgeable employees and the best equipment available so we can get the job done right. - Check here
|
|
|
 When should the Cold Forming process be considered? www.mfccorp.com The part has multiple diameters High production quantities of the part are needed Significant raw www.mfccorp.com material costs are associated with the part Part strength and reliability www.mfccorp.com are important manufacturing criteria The Value of Cold Forming: Because raw materials are often times the most www.mfccorp.com expensive component of manufacturing a part, Cold Forming is a low-cost alternative Cold Forming capabilities often reduce part costs while improving part quality and productivity. Generally the wire is feed into the forming machine by means of feed rolls, cropped to length by a shearing action then progressively cold formed. During the cold forming process, un-heated parts are forced into die cavities by forming punches to achieve www.mfccorp.com a desired configuration, the friction www.mfccorp.com between the forming tools and the material being formed results in an increase in temperature www.mfccorp.com of the work-piece resulting in a work hardening effect. This reduction in compressive load yields reduces internal stress on the fastener during the joining process, www.mfccorp.com so the fastener is less likely to fatigue when in the field. The mating parts are also subjected to less stress during the manufacturing process. The process also achieves a smooth finish and in some cases, eliminates cracks caused by traditional www.mfccorp.com riveting. Also, since the effective forming load typically does not exceed the fastener''s column strength, cold-head forming is possible without bending or swelling the fastener shank. “Orbital can replace fasteners such as screws, snap rings, threaded caps and rivets,” “For instance, studs cast in steel, aluminum, zinc, or even those molded into plastic, can be orbitally www.mfccorp.com formed.” We are the ultimate online resource for many different metal working jobs. We have the most knowledgeable employees and the best equipment available so we can get the job done right.
|